Usb To Serial Us111 Driver Windows 7

1. Usb To Serial Us111 Driver Windows 7 Bit
2. Usb To Serial Adapter Drivers
3. Usb To Serial Us111 Driver Windows 7 64-bit
4. Usb To 9 Pin Serial Cable Driver
5. Usb To Serial Us111 Driver Windows 7 64
6. Usb To 9 Pin Serial Driver
7. Usb To Serial Us111 Driver Windows 7 32-bit

Driver USB Serial Converter Digicom S.p.A. Download the latest drivers, firmware, and software for your HP USB to Serial Port is HP s official website that will help automatically detect and download the correct drivers free of cost for your HP Computing and Printing products for Windows and Mac operating system. To manually install the USB to Serial drivers on Windows 7 64-bit operating systems. Open Windows Control Panel. Select System Hardware Device Manager. The Device Manager window appears. Important: You must be logged on as an administrator or have administrative privileges to access the Device Manager. On mobile editions of Windows, such as Windows 10 Mobile, only drivers that are part of the operating system are loaded. Unlike desktop editions, it is not possible to load a driver through an external driver package. With the new in-box INF, Usbser.sys is automatically loaded if a USB-to-serial device is detected on the mobile device.

Usually, Windows 7, 8 and Windows 10 will automatically install the appropriate the ATEN USB-to-Serial driver

Usually, Windows 7, 8 and Windows 10 will automatically install the ATEN USB-to-Serial driver v3.3.7.131 (or 3.4.62.295).

This article describes the procedure for downloading and installing version 3.3.3.131 (or 3.4.62.295) of the Bridgemate Pro server USB-serial converter for 64-bit versions of Windows Vista, Windows 7, 8, 8.1 and 10.

There are a few different models of the ATEN USB-to-Serial Converter (dongle). Our testing indicates that driver version 3.3.7.131 (early versions were 3.1.0.0) works on most Windows 10 PC's. It is possible that some Windows 10 64-bit computers will need the later driver v3.4.62.295.

Only install this driver when you connect the Bridgemate Pro server to a USB port using the “Aten USB-to-serialserial converter” which is supplied with the Bridgemate Pro server. If the Bridgemate Pro server uses a direct serial connection port or a USB-serial converter of another brand, do not use this driver.

This driver should only be used on 64-bit versions of Microsoft Windows Vista, Windows 7, 8, 8.1 or 10. On 32-bit operating systems Windows XP, Windows Vista or Windows 7, use the 32-bit driver instead.

In case a driver is already installed, you should uninstall the current driver first.

1. Make sure the Aten USB to Serial converter is connected to one of the USB ports of your computer.
2. Left-click on Windows Start (XP, Vista, 7).
   Special note - Windows 8 & 10: Right-click on Windows Start left-click on Device Manager then go to step 6.
3. Right-mouse cllick on 'My Computer' or 'Computer.'
4. Click 'Properties.'
5. Click on 'Device Manager' in section 'Tasks' (Windows Vista/Windows 7), or click tab 'Hardware' and then press 'Device Manager' (Windows XP).
6. Double-click on 'Ports (COM & LPT).'
7. Right-mouse click on 'USB to serial bridge' (the name may be slightly different depending on the current driver version), then click 'Uninstall.'
   Special note - If the dongle driver has not been recognized, the listing here (or elsewhere in Device Manger) will be flagged with a yellow question mark'?'
8. In case an option 'Delete the driver software for this device' is shown, check this option. Next, click OK to confirm the uninstall of the driver.
9. The driver will now be un-installed.
10. Remove the USB converter from the USB port.

1. Make sure the Aten USB to Serial converter is NOT connected to the computer.
2. Download the driver 3.3.7.131 file or download the driver 3.4.62.295 file.
3. Open the downloaded file and follow the instructions on the screen. The driver will now be installed.
4. After the installation has completed, connect the USB-to-Serial converter to a USB port of your computer. The converter will automatically be recognized and is ready to use. You can now connect your Bridgemate Pro server through the dongle.

180622

Windows 7 64-bit & 32-bit, Windows Vista 64-bit & 32-bit, Windows XP, Windows 2000, Windows Me, Windows 98

Important note regarding Windows 7 and Vista:
The driver MUST be installed 'as Administrator'
Right-click the downloaded EXE file and choose Run as administrator

Download the Windows installer for the USB RS-232 adaptor:
Download for Windows 7/Vista/XP (32-bit)
Download for Windows 7/Vista (32-bit and 64-bit)

If for some reason the above driver does not work, try one of the following:
Download for Windows 7/Vista/XP (32-bit and 64-bit - Alternate driver)
Download for Windows XP, 2000, 98/ME (32-bit only)

For older cables (purchased prior to October, 2010):
Download for Windows 7/Vista/XP (32-bit and 64-bit)
Download for Windows Vista (32-bit only)

Run the installer, then after rebooting, plug the USB end of the adapter into one of the USB ports on the computer.

NOTE: For Windows 7, please use RC build 7100 or RTM Final version. (Installer program will not run on early Windows 7 or Beta versions)

Check the software driver installation Kottayam pushpanath novels in tamil pdf.

1) Open the Device Manager dialog from Control Panel

• Windows Vista: Start >> Control Panel >> System >> Hardware >> Device Manager
• Windows XP: Start >> Control Panel >> System >> Hardware >> Device Manager
• Windows 2000: Start >> Settings >> Control Panel >> System >> Hardware >> Device Manager
• Windows 98/ME: Start >> Settings >> Control Panel >> System >> Device Manager
  

2) Click the plus sign (+) next to 'Ports'.

3) If the device is properly installed, 'Serialio.com USB Serial Port' or 'Prolific USB-to-Serial COM Port' will be displayed.

The software driver is properly installed, but the USB-RS232 adaptor does not work as expected

One of the common reasons that software may not work as expected with a USB-Serial adaptor when the devcie is properly installed, is many older programs (and even some new ones) only support a limited number of COM ports (e.g. only COM1 - COM4)

If the USB-RS232 adapter is installed as COM5, it may need to be reassigned to COM1 - COM4 to work with some software.

The following outlines how to to reassign the COM port on Windows XP/2K/Me/98SE

Windows XP

1) Follow steps 1-3 of 'Check the software driver installation'above.

Usually, Windows 7, 8 and Windows 10 will automatically install the ATEN USB-to-Serial driver v3.3.7.131 (or 3.4.62.295).

This article describes the procedure for downloading and installing version 3.3.3.131 (or 3.4.62.295) of the Bridgemate Pro server USB-serial converter for 64-bit versions of Windows Vista, Windows 7, 8, 8.1 and 10.

There are a few different models of the ATEN USB-to-Serial Converter (dongle). Our testing indicates that driver version 3.3.7.131 (early versions were 3.1.0.0) works on most Windows 10 PC's. It is possible that some Windows 10 64-bit computers will need the later driver v3.4.62.295.

Only install this driver when you connect the Bridgemate Pro server to a USB port using the “Aten USB-to-serialserial converter” which is supplied with the Bridgemate Pro server. If the Bridgemate Pro server uses a direct serial connection port or a USB-serial converter of another brand, do not use this driver.

This driver should only be used on 64-bit versions of Microsoft Windows Vista, Windows 7, 8, 8.1 or 10. On 32-bit operating systems Windows XP, Windows Vista or Windows 7, use the 32-bit driver instead.

In case a driver is already installed, you should uninstall the current driver first.

1. Make sure the Aten USB to Serial converter is connected to one of the USB ports of your computer.
2. Left-click on Windows Start (XP, Vista, 7).
   Special note - Windows 8 & 10: Right-click on Windows Start left-click on Device Manager then go to step 6.
3. Right-mouse cllick on 'My Computer' or 'Computer.'
4. Click 'Properties.'
5. Click on 'Device Manager' in section 'Tasks' (Windows Vista/Windows 7), or click tab 'Hardware' and then press 'Device Manager' (Windows XP).
6. Double-click on 'Ports (COM & LPT).'
7. Right-mouse click on 'USB to serial bridge' (the name may be slightly different depending on the current driver version), then click 'Uninstall.'
   Special note - If the dongle driver has not been recognized, the listing here (or elsewhere in Device Manger) will be flagged with a yellow question mark'?'
8. In case an option 'Delete the driver software for this device' is shown, check this option. Next, click OK to confirm the uninstall of the driver.
9. The driver will now be un-installed.
10. Remove the USB converter from the USB port.

1. Make sure the Aten USB to Serial converter is NOT connected to the computer.
2. Download the driver 3.3.7.131 file or download the driver 3.4.62.295 file.
3. Open the downloaded file and follow the instructions on the screen. The driver will now be installed.
4. After the installation has completed, connect the USB-to-Serial converter to a USB port of your computer. The converter will automatically be recognized and is ready to use. You can now connect your Bridgemate Pro server through the dongle.

180622

Windows 7 64-bit & 32-bit, Windows Vista 64-bit & 32-bit, Windows XP, Windows 2000, Windows Me, Windows 98

Important note regarding Windows 7 and Vista:
The driver MUST be installed 'as Administrator'
Right-click the downloaded EXE file and choose Run as administrator

Download the Windows installer for the USB RS-232 adaptor:
Download for Windows 7/Vista/XP (32-bit)
Download for Windows 7/Vista (32-bit and 64-bit)

If for some reason the above driver does not work, try one of the following:
Download for Windows 7/Vista/XP (32-bit and 64-bit - Alternate driver)
Download for Windows XP, 2000, 98/ME (32-bit only)

For older cables (purchased prior to October, 2010):
Download for Windows 7/Vista/XP (32-bit and 64-bit)
Download for Windows Vista (32-bit only)

Run the installer, then after rebooting, plug the USB end of the adapter into one of the USB ports on the computer.

NOTE: For Windows 7, please use RC build 7100 or RTM Final version. (Installer program will not run on early Windows 7 or Beta versions)

Check the software driver installation Kottayam pushpanath novels in tamil pdf.

1) Open the Device Manager dialog from Control Panel

• Windows Vista: Start >> Control Panel >> System >> Hardware >> Device Manager
• Windows XP: Start >> Control Panel >> System >> Hardware >> Device Manager
• Windows 2000: Start >> Settings >> Control Panel >> System >> Hardware >> Device Manager
• Windows 98/ME: Start >> Settings >> Control Panel >> System >> Device Manager
  

2) Click the plus sign (+) next to 'Ports'.

3) If the device is properly installed, 'Serialio.com USB Serial Port' or 'Prolific USB-to-Serial COM Port' will be displayed.

The software driver is properly installed, but the USB-RS232 adaptor does not work as expected

One of the common reasons that software may not work as expected with a USB-Serial adaptor when the devcie is properly installed, is many older programs (and even some new ones) only support a limited number of COM ports (e.g. only COM1 - COM4)

If the USB-RS232 adapter is installed as COM5, it may need to be reassigned to COM1 - COM4 to work with some software.

The following outlines how to to reassign the COM port on Windows XP/2K/Me/98SE

Windows XP

1) Follow steps 1-3 of 'Check the software driver installation'above.

2) Right-click on the 'Prolific USB to Serial Port', then click Properties

3) Click on the 'Port Settings' tab. Click the 'Advanced' button.

4) In the 'COM Port Number' drop-down select the desired port number. For example if the software requires COM2, select COM2. Note the COM port must have '(in use)' listed next to it, if it does then another device with that name is already installed in the system. After selecting the desire port number, click 'OK.'

5) Click 'OK' again, and the device will show up as being on the same COM port that it was before (i.e., COM5), but should show up on the selected port name when the Device Manager dialog is closed and opened again.

6) Close the Device Manager. Launch the software to use with the new COM port.

Windows 2000, Me, and 98 SE (Second Edition)

1) Follow steps 1 2 of 'Check the software driver installation'above.

2) Right-click on the 'Prolific USB to Serial Port', then click Properties.

3) Click on the 'Port Settings' tab. Click the 'Advanced' button.

4) Uncheck 'Use automatic settings'.

5) Select 'Input/Output range'. Click on 'Change Settings'.

6) Type '02E8-02EF' in the Value box. This value will change the port to COM 4. If COM 4 is in use, you must choose another port. The values for each port are.

• COM 1: 03F8-03FF
• COM 2: 02F8-02FF
• COM 3: 03E8-03EF
• COM 4: 02E8-02EF

7) Enter the value, then click OK. Click OK again, then click Yes when the 'Creating a Forced Configuration' window appears. Click OK.

8) Restart the computer. The Device Manager can be checked, to see the COM port change.

Note: Adaptor may not be exactly as pictured above.
back